Seffnt Command Parameters; Seffnt Sefmap - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Table 2-48. Summary of SEFFNT command parameters
Parameter Specifies
label Specifies the name of the font mapping file or the
identifier of a font mapping table that will be created. If
the label does not exist, the SEFFNT command either
creates a table in the JDL or uses an existing mapping
file if MAP is specified.

SEFFNT SEFMAP

Specifies font mapping where the second specified
font is the SEF mapping for the first font.
SEFFNT MAP Specifies a font mapping that was defined previously.
Syntax
Options
Table 2-49. SEFFNT SEFMAP parameter options and definitions
Option
(font , font )
1 2
(font , font )
m n
NONE
UPD
Using LCDS Print Description Language

SEFFNT command parameters

The following table summarizes the use of the SEFFNT
command parameters.
The following sections describe the syntax of the command
parameters and give explanations of the parameter options.
SEFFNT SEFMAP
Specifies font mapping, which associates one font with another
font. A collection of font mappings may be stored in a mapping
file. (Font files are files having the .FNT extension and are stored
on disk.)
[label:] SEFFNT SEFMAP = {((font
NONE}
Definition
Font pair, where font is the SEF mapping for font
2
Font pair, where font is the SEF mapping for font
n
Disables font mapping and short edge feeding (SEF); stops previous SEFFNT.
UPDATE
Indicates that the specified font pairs change existing font mappings or
appending new mappings to the current font mapping table.
Specifying input parameters
Online Offline
Y Y
Y Y
Y Y
, font ) [, (font , font
1 2 m
.
1
m
DJDE
N
Y
Y
)]) |
n
2-45