Options
Table 2-77. VOLUME TCODE parameter options and definitions
Option
tcode Type
label
Default
Syntax
Options
Table 2-78. VOLUME UNPACK parameter options and definitions
Option
NONE
T4X3 or
T4X3H2
UNIVAC
Default
Using LCDS Print Description Language
Definition
Specifies one of the following standard character sets for which type
assignments are defined by default:
•
ASCII
•
BCD
•
EBCDIC
•
H2BCD
•
H6BCD
•
IBMCD
•
PEBCDIC
By coding any one of the keywords, you are furnished with a set of character to
type assignments.
Specifies an identified label of a TCODE parameter that defines a set of type
assignments.
EBCDIC
VOLUME UNPACK
Specifies the unpacking method of the input data when
unpacking is required.
VOLUME UNPACK = {NONE | T4X3 | T4X3H2 | UNIVAC}
Definition
Does not perform the unpacking operation.
Specifies unpacking routines in which 6-bit characters are extracted and
restored as 8-bit bytes.
Specifies an unpacking routine used for UNIVAC tapes, although you can
specify any of these routines independent of the HOST type.
NONE
Specifying input parameters
2-69