Output Sf2Function; Output Shift - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Specifying print format parameters
Syntax
Options
Table 4-71. OUTPUT SF2FUNCTION parameter options and definitions
Option
YES
NO
Default
Syntax
4-78

OUTPUT SF2FUNCTION

Specifies to the third party finisher whether or not it should
perform the user-defined SF2 operation on the current report.
This parameter provides control over third party finishing devices
that conform to the DFA standard. You use it to invoke Finishing
Function SF2 through the DFA channel C7. The user must
specify what function SF2 will have. Refer to your finishing
equipment vendor documentation for information on what
function should be specified for your finisher.
OUTPUT SF2FUNCTION = {NO | YES}
Definition
Instructs the finisher to initiate the user-defined SF2 Finishing Function on the
current sheet.
Specifies that Finishing Function SF2 will not be implemented on the current
sheet.
NO

OUTPUT SHIFT

Shifts the image of the data for three-hole paper, binding,
finishing, and edgemarking. Specifies that the entire content of
the page will be shifted, and the amount and direction of the
shift.
Image shift is the shifting of the image data (system page)
relative to the physical page. This shifting is vertical for
landscape pages and horizontal for portrait.
OUTPUT SHIFT = {YES | NO | (v , v )}
1 2
Using LCDS Print Description Language