Block Command; Block Command Parameters - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Specifying input parameters

BLOCK command

Table 2-4. Summary of BLOCK command parameters
Parameter
BLOCK ADJUST
BLOCK CONSTANT
BLOCK FORMAT
BLOCK LENGTH
BLOCK LMULT
BLOCK LTHFLD
BLOCK OFFSET
BLOCK
POSTAMBLE
BLOCK PREAMBLE
BLOCK ZERO
2-12
The BLOCK command defines block length characteristics and
recording modes for offline data sources.

BLOCK command parameters

The following table summarizes the BLOCK command
parameters.
Specifies
Specifies the adjustment value that is added to or
subtracted from the content of the block length
field.
Specifies that the block delimiter constant and all
subsequent data are ignored until the end of the
block.
Specifies the length field recording mode.
Specifies the maximum block size.
Specifies a multiplication factor to determine
block length.
Specifies the length of field that contains the
block length specification.
Specifies the location of the block length field.
Specifies the length of extraneous data at the
end of the block.
Specifies the length of the operating system
portion of block
Specifies that the criterion test for the end of the
block is 0.
The following sections describe the syntax of the BLOCK
command parameters and explain their options.
Offline
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Using LCDS Print Description Language
Online DJDE
N N
N N
N N
N N
N N
N N
N N
N N
N N
N N