Output Duplex; Output Faceup - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Options
Table 4-50. OUTPUT DESTINATION parameter options and definitions
Option
BIN
TRAY
EXPORT
Default
Syntax
Options
Table 4-51. OUTPUT DUPLEX parameter options and definitions
Default

OUTPUT DUPLEX

parameter: point
to note
Syntax
Using LCDS Print Description Language
Definition
Specifies that the currently selected bin is used.
Sends output to the sample tray.
Transparencies should always be sent to this tray.
NOTE: Use caution when selecting the TRAY option because of the limited
capacity of the sample tray (100 sheets).
Specifies that sheets be sent to the bypass transport to be fed into a finishing
device. The EXPORT option takes effect only if:
• The user interface Output window has "System Specified" selected in the
Output Location field, and
• The Finishing field displays the name of a finishing device.
BIN
OUTPUT DUPLEX
Specifies whether printing is to occur in duplex (print on both
sides of a sheet) or simplex (print on a single side).
OUTPUT DUPLEX = {YES | NO}
Option Definition
YES Specifies two sided (duplex) printing.
NO Specifies single sided (simplex) printing.
NO
Transparencies cannot print in duplex.

OUTPUT FACEUP

Specifies that printed pages are delivered face up to the output
destination.
OUTPUT FACEUP = {YES | NO}
Specifying print format parameters
4-53