Sefmap Djde: Points To Note; Sefmap Djde Examples - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Options
Option
(font , font )
1 2
(font , font )
m n
UPD
REP
NONE
Using LCDS Print Description Language
Using Dynamic Job Descriptor Entries (DJDEs)
Table 5-54. SEFMAP DJDE options and definitions
Definition
Font pair, where font is the SEF mapping for font
2
Font pair, where font is the SEF mapping for font
n
UPDATE
Indicates that the specified font pairs change existing font mappings or
appending new mappings to the current font mapping table.
REPLACE
Indicates that the specified font pairs create a new mapping table to replace
the current one.
Disables short edge feeding (SEF) and font mapping (stops a previous
SEFFNT specification).

SEFMAP DJDE: points to note

• UPD and REP options affect only memory resident font
mapping tables (not disk resident tables such as those found
in JDLs).
• If you want to use 11 by 17 inch, A4, or any size paper that
requires short edge feed, be aware that the system does not
scale or rotate form, logo, and image files. The graphic file
must be created in the desired orientation.
• A SEFMAP DJDE that is in the data stream is processed
whether or not the JDL contains short edge feed commands.

SEFMAP DJDE examples

Following are examples of how the SEFMAP DJDE works.
Example 1:
SEFMAP=((font1,font7), (font5,font6),UPD);
Before the SEFMAP DJDE shown above was encountered, the
contents of the memory font mapping table were:
((font1,font2), (font3,font4))
After the SEFMAP DJDE is processed, the contents of the
memory font mapping table are:
((font1,font7), (font3,font4), (font5,font6))
.
1
.
m
5-65