Destination Djde: Points To Note; Duplex Djde - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Options
Table 5-19. DESTINATION DJDE options and definitions
Option
BIN
TRAY
EXPORT

DUPLEX DJDE

Type
Syntax
Options
Option
YES
NO
Using LCDS Print Description Language
Using Dynamic Job Descriptor Entries (DJDEs)
Definition
Specifies delivery to the currently active output bin.
Specifies delivery to the sample tray.
NOTE: Use caution when selecting the sample tray because of its limited
capacity.
Specifies that sheets will be sent to the bypass transport.

DESTINATION DJDE: points to note

• Transparencies should be sent only to the sample tray.
• EXPORT is honored only if the bypass transport is specified
on the LCDS Setup window as the output destination.
Specifies whether printing is to occur on both sides of a page
(duplex mode) or a single side (simplex mode). The choice takes
effect on the next page boundary.
Page oriented
DUPLEX = {YES | NO}
Table 5-20. DUPLEX DJDE options and definitions
Definition
Specifies that printing will occur on both sides of a sheet. (This is also called
"two–sided printing.")
Specifies that printing will occur on only the front side of the sheet. (This is also
called "one–sided printing."
5-25