Rstack Delimiter; Rstack Hrptna - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Using logical processing
Syntax
Options
Table 3-41. RSTACK DELIMITER parameter options and definitions
Option
YES
NO
Default
Point to note:
RSTACK
DELIMITER
parameter
Syntax
3-56

RSTACK DELIMITER

Specifies whether or not RSTACK records are treated as data
records.
RSTACK DELIMITER = {YES | NO}
Definition
Specifies that all consecutive records that satisfy the TEST criteria are treated
as a delimiter packet and not as data records.
Specifies that this single record separates one report from another and is
treated as a data record.
NO
You can use DELIMITER = NO to detect a record that is uniquely
recognizable as the first record of each report and have the
record treated as a report boundary. Two common examples of
this usage are:
• A page heading print record that has page numbers on it
such as "Page 00001" (using Constant mode criteria)
• A page heading record that has a report number on it such as
"Report 00001" (using Change mode Criteria).

RSTACK HRPTNA

Specifies that a subfield of the first record will be displayed on
the Job Manager window on the user interface.
If DELIMITER = YES is also coded, the subfield is from the first
delimiter record of the report. For DELIMITER = NO, the subfield
is from the first record, even if that record does not satisfy the
RSTACK test.
RSTACK HRPTNA = {(offset, length) | NONE}
Using LCDS Print Description Language