Rsuspend And Rresume Test; Rresume And Rsuspend Commands: Points To Note - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Using logical processing
Options
Table 3-37. RSUSPEND and RRESUME BEGIN parameter options and
Option
CURRENT
NEXT
Default
Syntax
Options
Table 3-38. RSUSPEND and RRESUME TEST parameter options and
Options
testexp
Default
3-50
Definition
Specifies that printing will stop or resume on the current record.
• If CURRENT is coded for RSUSPEND, the record satisfying testexp does
not print.
• If CURRENT is coded for RRESUME, the record is printed.
Specifies that printing will stop or resume with the next record.
• If NEXT is coded for RSUSPEND, the record satisfying testexp is printed,
and printing is suppressed beginning with the next record.
• If NEXT is coded for RRESUME, the record satisfying the testexp is not
printed, and printing begins with the next record.
NEXT

RSUSPEND and RRESUME TEST

Defines the test expressions for the record at which printing will
be suppressed (RSUSPEND) or resumed (RRESUME).
RSUSPEND TEST = testexp
RRESUME TEST = testexp
Definitions
test expression.
Defines a test expression for the record with which printing will be suspended
(RSUSPEND) or resumed (RRESUME) following print suppression.
Refer to "Coding a test expression" earlier in this chapter for the format and
syntax of a testexp.
No default

RRESUME and RSUSPEND commands: points to note

• On the FreeFlow Print Server LCDS system, RSUSPEND
and RRESUME are supported only for offline printing.
definitions
definitions
Using LCDS Print Description Language