Back Panel - Dell PowerConnect 5548P System User's Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
The Reset button does not extend beyond the unit's front, and it must be
activated with a pin.

Back Panel

The back panel of the non-PoE models, shown in Figure 3-3, contains a
Redundant Power Supply (RPS) connector, Location LED, and power
connector.
The back panel of the PoE models, shown in Figure 3-4, contains a Modular
Power Supply (MPS) connector, Location LED, power connector, and two fan
outlets.
Figure 3-3. PowerConnect 5524/48 Back Panel
Locator
Figure 3-4. PowerConnect 5524/48/P Back Panel
Locator
Fan
The elements on the back panel are used as follows:
Locator LED — This LED is lit when the Unit Identification feature is
•
selected. See "Unit Identification (Location)" on page 374 for more
information about this feature.
• RPS/MPS — Connector for auxiliary power supply. See "Power Supplies"
on page 44 for more information.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGHardware.fm
RPS
MPS
Fan
Dell PowerConnect 55xx Systems User Guide
A/C Power Supply
A/C Power Supply
39