Dell PowerConnect 5548P System User's Manual page 569

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Adding Entries to a Dynamic ARP Inspection List Using CLI Commands
The following table summarizes the CLI commands for configuring the fields
in the Dynamic ARP Inspection Entries pages .
Table 18-3. Dynamic ARP Inspection List Entries CLI Commands
CLI Command
ip ip-address mac-address
mac-address
no ip ip-address mac-address
mac-address
show ip arp inspection list
The following is an example of some of the CLI commands:
console(config)# ip arp inspection list create servers
console(config-arp-list)# ip 172.16.1.1 mac-address
0060.704c.7321
console(config-arp-list)# ip 172.16.1.2 mac-address
0060.704c.7322
console(config-arp-list)# do show ip arp inspection list
List name: servers
Assigned to VLANs:
IP
--------------- ------------------
172.16.1.1
172.16.1.2
console(config-arp-list)#
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
568
Dell PowerConnect 55xx Systems User Guide
Contax\CxUGSwitching_ARP.fm
Description
Creates a static ARP binding.
Use the no form of this command to
delete a static ARP binding..
Displays the static ARP binding list.
MAC
00:60:70:4c:73:21
00:60:70:4c:73:22