Dell PowerConnect 5548P System User's Manual page 491

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Protocol ports can either be attached to a VLAN ID or a VLAN name.
– VLAN ID (1- 4094) —Check and enter a VLAN ID.
or
– VLAN Name — Check and enter a VLAN name.
Defining Protocol Ports Using CLI Commands
The following table summarizes the CLI command for defining protocol
ports.
Table 14-4. Protocol Port CLI Commands
CLI Command
switchport general map
protocols-group group vlan
vlan-id
no switchport general map
protocols-group group
The following is a sample of the CLI commands:
console (config-if)#
1
group vlan
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
490
Dell PowerConnect 55xx Systems User Guide
Contax\CxUGSwitching_VLAN.fm
switchport general map protocols-
8
Description
Sets a protocol-based classification rule.
Use the no form of this command to
delete a classification.