Dell PowerConnect 5548P System User's Manual page 354

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
3 Select a Firmware/Configuration option. The possible options are:
– Firmware Download — A firmware file is downloaded.
– Configuration Download — A configuration file is downloaded.
4 Select to download firmware or a configuration file via a USB port or
HTTP in Download Protocol.
5 If the Firmware Download option was selected, enter the following:
Source File Name (1-64 characters) — The file to be downloaded.
–
– Destination File Type — The destination file type to which the file is
downloaded. The possible options are:
• Software Image — Downloads the Image file. The image file
overwrites the non-active image. It is recommended to designate
that the non-active image becomes the active image after reset,
and then to reset the device following the download. During the
Image file download a dialog box opens that displays the
download progress, and browsing is disabled.
• Boot Code — Downloads the Boot file.
6 If the Configuration Download option was selected, enter the following:
– Server IP Address — Enter the IP address of the server.
– Source File Name (1-64 Characters) — Enter the source file name.
– Destination File Name — Select the destination file to which the
configuration file is downloaded. The possible options are:
Running Configuration — Check to download commands into
•
the Running Configuration file. The current file is overwritten.
• Startup Configuration — Check to download commands into the
Startup Configuration file. The current file is overwritten.
• New File Name (1-64 Characters) — Check to copy commands
into a file in flash memory. Enter the filename.
7 Click Activate to start the download process.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGSystemConfig.fm
Dell PowerConnect 55xx Systems User Guide
353