Dell PowerConnect 5548P System User's Manual page 498

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
– Associate Primary VLAN — If the Private VLAN type is Isolated,
check to associate the isolated VLAN with a primary VLAN, thus
allowing traffic between isolated and promiscuous ports.
Primary VLAN ID — Select a VLAN to be associated with the
–
isolated VLAN.
4 To assign ports to the private VLAN, click Membership.
5 Select a Primary VLAN ID.
6 Select a Isolated VLAN ID.
7 Select the ports to be assigned to each VLAN, and assign each port/LAG a
port type in the Admin row of ports/LAGs. The possible options are:
H - Host (Isolated) — Port is isolated.
–
– P - Promiscuous — Port is promiscuous.
– C - Conditional (operational state depends on Port VLAN Mode) —
Port receives the Port VLAN type set in the VLAN Port Settings page.
See "Port Modes" on page 470 for a description of the various port modes.
Configuring Private VLAN Using CLI Commands
The following table summarizes the CLI commands for configuring private
VLANs.
Table 14-6. Private VLAN CLI Commands
CLI Command
private-vlan
{primary|isolated}
no private-vlan
private-vlan association
[add|remove] secondary-vlan-
list
no private-vlan association
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGSwitching_VLAN.fm
Dell PowerConnect 55xx Systems User Guide
Description
Configures a private VLAN.
Use the no form of this command to
return the VLAN to normal VLAN
configuration.
Configures the association between the
primary VLAN and the secondary
VLANs.
Use the no form of this command to
remove the association.
497