FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Expiry Date — If Aging is selected, displays the expiration date of the
–
enable password.
–
Lockout Status — Displays the number of failed authentication
attempts since the user last logged in successfully (if the Enable
Login Attempts checkbox is selected in the Password Management
page.) Specifies LOCKOUT, when the user account is locked.
–
Reactivate Suspended User — Check to reactivate the specified user's
access rights. Access rights can be suspended after unsuccessfully
attempting to login.
Assigning Enable Passwords Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the Enable Password page.
Table 9-47.
Enable Password CLI Commands
CLI Command
enable password [level
level] d [encrypted]
no enable password [level
level]
The following is an example of the CLI commands:
console(config)# enable password level 15 secret
TACACS+
The device can act as a Terminal Access Controller Access Control System
(TACACS+) client. TACACS+ provides centralized validation of users
accessing the device, while still retaining consistency with RADIUS and other
authentication processes.
TACACS+ provides the following services:
Authentication — Provides authentication during login and via user
•
names and user-defined passwords.
•
Authorization — Performed at login after authentication. The TACACS+
server checks the privileges of the authenticated user.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
282
Dell PowerConnect 55xx Systems User Guide
Contax\CxUGSystemConfig.fm
Description
Sets a local password to control access to
user and privilege levels.
Use the no form of this command to
remove the password requirement.