FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
2 To bind an ACL to an interface, select an interface and click Edit.
3 Select an ACL(s). You can select one of each type (MAC-based ACL,
IPv4-based ACL or IPv6-based ACL) or one IPv4-based ACL and one
IPv6-based ACL.
Configuring ACL Bindings Using CLI Commands
The following table summarizes the CLI commands for configuring ACL
Bindings.
.
Table 8-8. ACL Bindings CLI Commands
CLI Command
service-acl input acl-name1
[acl-name2]
no service-acl input
show access-lists [acl-name]
The following is an example of some of the CLI commands:
console(config)# mac access-list extended server
console(config-mac-al)# permit 00:00:00:00:00:01
00:00:00:00:00:ff any
console(config-mac-al)# exit
console(config)# interface gi1/0/1
console(config-if)# service-acl input server
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
124
Dell PowerConnect 55xx Systems User Guide
Contax\CxU_Switching_NetworkSecurity.fm
Description
Controls access to an interface
Use the no form of the command to
remove access control.
Displays access control lists (ACLs)
configured on the switch.