The Back Panel Contains An Rps Connector, Console Port, And Power Connector; Powerconnect 3548 Port Description - Dell PowerConnect 3524P User Manual

There are two buttons on the front panel. The Stack ID button is used to select the unit number.
The second button is the Reset Button which is used to manually reset the device. The Reset button
does not extend beyond the unit's front panel surface, so reset by pressing it accidentally is prevented.
On the front panel are all the device LEDs.
The following figure illustrates the PowerConnect 3524 back:
Figure 2-2. PowerConnect 3524 Back Panel
Console Port

The back panel contains an RPS connector, console port, and power connector.

PowerConnect 3548 Port Description

The PowerConnect 3548 device is configured with the following ports:
• 48 FE ports — RJ-45 ports designated as 10/100Base-T ports
• 2 Fiber ports — Designated as 1000Base-X SFP ports
• 2 Gigabit ports — Designated as 1000Base-T ports
• Console port — RS-232 Console based port
The following figure illustrates the PowerConnect 3548 front panel.
Figure 2-3. PowerConnect 3548 Front Panel
10/100 Base-T Ports 1, 3, 5, 7, ...47
10/100 Base-T Ports 2, 4, 6, 8, ...48
28
Hardware Description
RPS Connector
Power Connector
Reset Button
Stacking Button
Stacking LEDs
G1 G2
1000Base-X
SFP Ports
System LEDs
G3
G4
Stacking
Ports