Accessing The Device Through The Cli - Dell PowerConnect 5548P System User's Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

Accessing the Device Through the CLI

You can manage the device using CLI commands, over a direct connection to
the terminal console, or via a Telnet connection.
Direct Connection
Connect the device to the console and enter the CLI commands upon
receiving a prompt.
Telnet Connection
Telnet is a terminal emulation TCP/IP protocol. RS-232 terminals can be
virtually connected to the local device through a TCP/IP protocol network.
Telnet is an alternative to a local login terminal, where a remote login is
required.
The device supports up to four simultaneous Telnet sessions. All CLI
commands can be used over a Telnet session.
If access is via a Telnet connection, ensure that the device has an IP address
and that software has been downloaded to the device.
To start a Telnet session:
1 Select Start > Run.
The Run window opens.
2 Type cmd.
The cmd window opens.
3 In the cmd window, type Telnet
The Telnet session begins.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGAdvanced Configuration.fm
Dell PowerConnect 55xx Systems User Guide
IP address
< >
<Enter>.
71