Dell PowerConnect 5548P System User's Manual page 238

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
4 To modify or remove an IPv6 neighbor, click Edit, and enter the fields
described on the Add page.
5 If an entry for the specified IPv6 address already exists in the neighbor
discovery cache, as learned through the IPv6 neighbor discovery process,
you can convert the entry to a static entry. To do this, select Static in the
Type field.
Defining IPv6 Neighbors Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the IPv6 Neighbors pages.
Table 9-31. IPv6 Neighbors CLI Commands
CLI Command
ipv6 neighbor ipv6_addr
{[gigabitethernet|tengigabitethernet]
port-number|vlan vlan-id|port-channel
LAG-number]} mac_addr
no ipv6 neighbor ipv6_addr
{[gigabitethernet|tengigabitethernet]
port-number|vlan vlan-id|port-channel
LAG-number]}
show ipv6 neighbors
{static|dynamic}[ipv6-address ipv6-
address] [mac-address mac-address]
[[gigabitethernet|tengigabitethernet]
port-number|vlan vlan-id|port-channel
LAG-number]]
clear ipv6 neighbors
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGSystemConfig.fm
Dell PowerConnect 55xx Systems User Guide
Description
Configures a static entry in
the IPv6 neighbor discovery
cache.
Use the no form of this
command to remove a static
IPv6 entry from the IPv6
neighbor discovery cache.
Displays IPv6 neighbor
discovery cache information.
Deletes all entries in the IPv6
neighbor discovery cache.
237