Dell PowerConnect 5548P System User's Manual page 308

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
– End IP Address — Last IP address in the range of excluded IP
addresses.
Excluding Addresses Using CLI Commands
The following table summarizes the CLI commands for excluding addresses.
Table 9-54. Excluding Addresses Using CLI Commands
CLI Command
ip dhcp excluded-address low-
address [high-address]
no ip dhcp excluded-address
low-address [high-address]
show ip dhcp excluded-addresses Displays the excluded addresses.
The following is an example of the CLI commands:
console(config)# ip dhcp excluded-address 172.16.1.100
172.16.1.199
console> show ip dhcp excluded-addresses
The number of excluded addresses ranges is 2
Excluded addresses:
10.1.1.212- 10.1.1.219, 10.1.2.212- 10.1.2.219
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGSystemConfig.fm
Dell PowerConnect 55xx Systems User Guide
Description
Configures a DHCP address pool on a
DHCP Server and enter DHCP Pool
Configuration mode.
Use the no form of this command to
remove the address pool.
307