Snmp Communities - Dell PowerConnect 5548P System User's Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Defining SNMPv3 Users Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed in the User Security Model pages.
Table 9-59. SNMP Users CLI Commands
CLI Command
snmp-server user username groupname
{v1|v2c|[remote-host] v3 [encrypted]
[auth {md5|sha} auth-password]}
no snmp-server user username [remote-
host]
show snmp users [username]
The following is an example of the CLI commands:
console(config)#
console(config)#
console(config)#

SNMP Communities

When using SNMP v1,2, communities strings (passwords) are used to provide
access rights in the following ways:
• Basic Table — The access rights of a community can be read-only, read-
write, or SNMP Admin. In addition, you can restrict access to the
community to only certain MIB objects using a view. Views are defined in
the Views Setting pages.
• Advanced Table — Access rights to a community are assigned to a group
that consists of users. A group can have Read, Write, and Notify access to
views. Groups are defined in the Access Control pages.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGSystemConfig.fm
snmp-server user
snmp-server user
snmp-server user
Dell PowerConnect 55xx Systems User Guide
Description
Configures a new SNMP V3
user.
Use the no form of the
command to remove a user.
Displays the configuration of
users.
tom acbd v1
tom acbd v2c
tom acbd v3
327