Dell PowerConnect 5548P System User's Manual page 122

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
– Shutdown — Drops packet that meet the ACL criteria, and disables
the port to which the packet was addressed.
– Logging of Dropped Packets — Check to activate logging of dropped
packets.
Configuring IP-based ACEs Using CLI Commands
The following table summarizes the CLI commands for configuring I P-based
.
ACLs
Table 8-7. IP-Based ACE CLI Commands
CLI Command
permit protocol {any|{source-prefix/length
}{any|destination- prefix/length } [dscp
number|precedence number] [time-range
time-range-name]
permit icmp {any|{source-prefix/length
}{any|destination-prefix/length }
{any|icmp-type}{any|icmp-code} [dscp
number|precedence number] [time-range
time-range-name]
permit tcp {any|{source-prefix/length }
{any|source-port/port-range}
}{any|destination prefix/length }
{any|destination-port/port-range} [dscp
number|precedence number] [match-all list-
of-flags] [time-range time-range-name]
permit udp {any|{source-prefix/length }}
{any|source-port|port-range}
}{any|destination prefix/length }
{any|destination-port/port-range} [dscp
number|precedence number] [time-range
time-range-name]
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxU_Switching_NetworkSecurity.fm
Dell PowerConnect 55xx Systems User Guide
Description
Sets permit conditions
for IPv6 access list.
121