Dell PowerConnect 5548P System User's Manual page 525

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Managing Bridge Multicast Groups Using CLI Commands
The following table summarizes the CLI commands for managing Multicast
service members as displayed in the Bridge Multicast Group pages.
Table 16-3. Bridge Multicast Group CLI Commands
CLI Command
bridge multicast address {mac-
multicast-address|ip-multicast-
address}
no bridge multicast filtering
bridge multicast forbidden
address {mac-multicast-
address|ip-multicast-
address}[add|remove]
{[gigabitethernet|tengigabitethe
rnet] interface-list
channel LAG-number-list}
no bridge multicast forbidden
address {mac-multicast-address}
show bridge multicast address-
table [vlan vlan-
{mac-multicast-address
multicast-address}
ip|mac]
The following is an example of the CLI commands:
console(config-if)# bridge multicast address 0100.5e02.0203
add gi1/0/11,gi1/0/12
console(config-if)# end
console # show bridge multicast address-table
VLAN MAC Address
---- -----------
1 0100.5e02.0203
Forbidden ports for multicast addresses:
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
524
Dell PowerConnect 55xx Systems User Guide
Contax\CxUGSwitching_Multicast.fm
|
port-
id] [
address
|
ip-
]
[format
Type
-----
static
Description
Registers MAC-layer Multicast
addresses to the bridge table, and
adds static ports to the group.
Use the no form of this command to
disable Multicast address filtering.
Forbids adding a specific Multicast
address to specific ports. Use the no
form of this command to return to
default
Use the no form of this command to
restore the default configuration.
Displays Multicast MAC address
table information.
Ports
----------
gi1/0/11,
gigi1/0/12