Dell PowerConnect 5548P System User's Manual page 87

Dell - powerconnect switch

Hide thumbs Also See for PowerConnect 5548P:

Table of Contents

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

1 Enter the show version command to verify which software version is

currently running on the device. The following is an example of the

information that appears:

console# show version

----- --------------

2 Enter the copy {tftp://|usb://}{tftp address}/{file

name} boot command to copy the boot image to the device. The

following is an example of the information that appears:

console# copy tftp://50.1.1.7/contax-10014.ros image

01-Oct-2006 11:57:35 %COPY-I-FILECPY: Files Copy - source URL

tftp://50.1.1.7/contax-10014.ros destination URL flash://image

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

01-Sep-2010 11:57:38 %INIT-I-Startup: Cold Startup

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

01-Sep-2010 11:59:05 %COPY-N-: The copy operation was completed

successfully!

Copy: 5954757 bytes copied in 00:01:30 [hh:mm:ss]

3 Enter the reload command. The following message is displayed:

console# reload

This command will reset the whole system and

disconnect your current session. Do you want to

continue (Y/N) [N]?

4 Enter Y. The device reboots.

D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY

Dell PowerConnect 55xx Systems User Guide

Contax\CxUGAdvanced Configuration.fm

Boot version

-----------------