Dell PowerConnect 5548P System User's Manual page 706

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
2 To add a new counter, click Add, and enter the fields:
– Counter Set—Select the counter set. The possible options are:
• Set 1 — Displays the statistics that contains all interfaces and
queues with a high DP (Drop Precedence).
• Set 2 — Displays the statistics that contains all interfaces and
queues with a low DP.
– Interface — Select the unit/interface for which Queue statistics are
displayed.
– Queue — Select the queue on which packets were forwarded or tail
dropped.
Defining QoS Statistics Using CLI Commands
The following table summarizes the CLI commands for setting the fields in
the QoS Statistics pages.
Table 22-21. QoS Statistics CLI Commands
CLI Command
qos statistics queues set-number
{queue|all} {dp|all}
{[gigabitethernet|tengigabitethe
rnet]port-number|all}
no qos statistics queues set-
number
clear qos statistics
show qos statistics
The following is an example of the CLI commands:
console(config)# qos statistics queues 1 all all all
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGQoS.fm
Dell PowerConnect 55xx Systems User Guide
Description
Enables QoS statistics for output
queues.
Use the no form of this command to
disable QoS statistics for output
queues.
Clears the statistics
Displays the statistics
705