Global Settings - Dell PowerConnect 5548P System User's Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

Global Settings

To enable ARP inspection on the device:
1 Click Switching > Dynamic ARP Inspection > Global Settings in the
tree view to display the Global Settings page.
Figure 18-1. Global Settings
2 Enter the fields:
• Enable ARP Inspection — Enable/disable ARP inspection.
• ARP Inspection Validate — Enable/disable the following checking
source MAC address, destination MAC address and IP addresses
against the respective addresses in the ARP body.
• Minimal Syslog Interval (0 – 86400) — Enter the minimum time
interval between successive ARP SYSLOG messages.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGSwitching_ARP.fm
Dell PowerConnect 55xx Systems User Guide
563