The following is an example of the CLI commands:
console (config)# snmp-server user John user-group auth-md5 1234
console (config)# end
console# show snmp users
Name
-------
John
Defining SNMP Communities
Access rights are managed by defining communities on the SNMPv1,2 Community page. When
the community names are changed, access rights are also changed. SNMP Communities are
defined only for SNMP v1 and SNMP v2. To open the SNMPv1,2 Community page, click System→
SNMP→ Communities in the tree view.
Figure 6-67. SNMPv1,2 Community
The SNMPv1,2 Community page contains the following fields:
SNMP Management Station — The management station IP address for which the SNMP
community is defined.
Community String — Functions as a password and used to authenticate the management station
to the device.
202
Configuring System Information
Group Name
Auth Method
----------
-----------
user-group
md5
Remote
------