Table 3-3. Front Panel Led Codes And Descriptions - HP 3000 Installation Manual

LED CODE
o
2
5
o
B
c
D
E
A
Table 3-3. Front Panel LED Codes and Descriptions
DESCRIPTION
Not used.
ROM code loads into WCS.
Not used.
Processor chip, WCS, RFILE tests executing.
Maintenance code entered. Multi-bit memory error occurred.
A steady "B" means the memory test is executing. A flashing "B"
means the memory failed the test.
A steady "C" means the Console A TP 3 7 in slot 1 is being tested.
A
flashing "C" al terna ting with a
"1"
means the Console A TP 3 7
failed. If only a flashing "C" occurs, speed sensing of the
terminal failed.
IOMAP
This error code shows that the ATP37 or PIC in the indicated
Extender slot has failed. The "E" and the slot number flash
alternately.
All tests passed.
System Installation
0984
3-7