PLC-HF15000L Expand Serial Command Functional Specifications
9.9 Lamp Status Read Commands
9.9.1 CR_LAMPREPL Command
Command
"CR_LAMPREPL" [CR]
Details
Get the information of Lamp Replacement time
Acceptable
Response
Unacceptable
9.9.2 CR_LAMPMODE Command
Command
"CR_LAMPMODE" [CR]
Details
Get Lamp mode setting status
Acceptable
Response
Unacceptable
9.9.3 CR_LAMPCONSTTAR Command
Command
"CR_LAMPCONSTTAR" [CR]
Details
Get value of Target for Constant mode
Acceptable
Response
Unacceptable
9.9.4 CR_LAMPCONSTCUR Command
Command
"CR_LAMPCONSTCUR" [CR]
Details
Get value of Current for Constant mode
Acceptable
Response
Unacceptable
"000_%1" [CR]
"4****"
4 ---------------- indicates 4 lamps are used in this model.
* ---------------- indicates the status of each lamp in lamp number
%1
e.g.
"4NYYN" --------- This indicates it is 4-lamps system, and Lamp #1
"?" [CR]
"000_%1" [CR]
"4LAMP" ------------- Lamp mode is set to 4-Lamps
"3LAMPAUTO" --- Lamp mode is set to 3-Lamps (Auto) and
"3LAMP123" ----- Lamp mode is set to 3-Lamps (LAMP1, 2 and 3)
"3LAMP234" ----- Lamp mode is set to 3-Lamps (LAMP2, 3 and 4)
"3LAMP134" ----- Lamp mode is set to 3-Lamps (LAMP1, 3 and 4)
%1
"3LAMP124" ----- Lamp mode is set to 3-Lamps (LAMP1, 2 and 4)
"2LAMPAUTO" --- Lamp mode is set to 2-Lamps (Auto) and
"2LAMP23" ----- Lamp mode is set to 2-Lamps (LAMP2 and 3)
"2LAMP14" ----- Lamp mode is set to 2-Lamps (LAMP1 and 4)
"CONSTANT" ------ Lamp mode is set to Constant mode.
"Error Code" [CR]
"000_%1" [CR]
%1
"0000"-"1024"
"Error Code" [CR]
"000_%1" [CR]
%1
"0000"-"1024"
"Error Code" [CR]
83/105
order.
"Y" means the lamp operating time is over the
threshold for lamp replacement, and "N" means
it has not reached to.
and #4 have not been reached to the
replacement time while #2 and #3 should be
replaced.
automatically and preferentially uses lamps
with shorter cumulated lighting time
automatically and preferentially uses lamps
with shorter cumulated lighting time