PLC-HF15000L Expand Serial Command Functional Specifications
8.9.20 CF_BLENDSTART Command
Command
"CF_BLENDSTART_%1_%2" [CR]
"LEFT" ---------------------- Left side
"RIGHT" -------------------- Right side
%1
"TOP" ----------------------- Upper side
"BOTTOM" ---------------- Lower side
"000"-"1024"-------------------- Directly specify value of direction of %1
*Value of upper limit changes by choice of %1
Left ---------------------- 000~1024
%2
Right -------------------- 000~1024
Top ---------------------- 000~540
Bottom ----------------- 000~540
Set the value of Start (Left/Right/Top/Bottom) for direction specified by Edge
blending %1. (Available only in the normal Power ON status)
Details
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.9.21 CF_BLENDBLK Command
Command
"CF_BLENDBLK_%1_%2" [CR]
"R" ---------------------- Red
%1
"G" ---------------------- Green
"B" ----------------------- Blue
%2
"-127" ~ "0127"-------------------- Directly specify value of color of %1
Set value of color specified by Edge blending %1.
(Available only in the normal Power ON status)
Details
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.9.22 CF_BLENDBLKALL Command
Command
"CF_BLENDBLKALL_%1" [CR]
"UP" ------------------------------- Increment value of Black level(R/G/B) by 1
%1
"DN" ------------------------------ Decrement value of Black level(R/G/B) by 1
Set value of all of Black level of Edge blending.
(Available only in the normal Power ON status)
Details
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
49/105