Cr_Blend Command; Cr_Blendstart Command; Cr_Blendblk Command - Sanyo PLC-HF15000L - 15000 Lumens Manual

PLC-HF15000L Expand Serial Command Functional Specifications

9.10.14 CR_BLEND Command

Command "CR_BLEND" [CR]
Details Get all values set for Width in Edge blending
Acceptable
%1, %2,
Response
%3, %4
Unacceptable

9.10.15 CR_BLENDSTART Command

Command "CR_BLENDSTART" [CR]
Details Get all values set for Start in Edge blending
Acceptable
%1, %2,
Response
%3, %4
Unacceptable

9.10.16 CR_BLENDBLK Command

Command "CR_BLENDBLK" [CR]
Details Get all values set for Black level in Edge blending
Acceptable
%1, %2,
Response
Unacceptable
"000_%1_%2_%3_%4" [CR]
Left width data comes first, and then one space, after that right
width data is followed.
%1 = Left width
%2 = Right width
%3 = Top width
%4 = Bottom width
e.g.
"0100_0100_0100_0100"[CR]
! ' Left = width 100
Right = width 100
Top = width 100
Bottom = width 100
"Error Code" [CR]
"000_%1_%2_%3_%4" [CR]
Left width data comes first, and then one space, after that right
width data is followed.
%1 = Left width
%2 = Right width
%3 = Top width
%4 = Bottom width
e.g.
"0100_0100_0100_0100"[CR]
! ' Left = width 100
Right = width 100
Top = width 100
Bottom = width 100
"Error Code" [CR]
"000_%1_%2_%3" [CR]
Data of red comes first, and then one space, after that data of
green is followed.
%1 = Red
%2 = Green
%3 = Blue
%3
e.g.
"0100_0100_0100"[CR]
! ' Red = 100
Green = 100
Blue = 100
"Error Code" [CR]
90/105