Cf_Ccaptioncolor Command; Cf_Filh Command; Cf_Filtimer Command; Cf_Filcleantimer Command - Sanyo PLC-HF15000L - 15000 Lumens Manual

PLC-HF15000L Expand Serial Command Functional Specifications

8.9.58 CF_CCAPTIONCOLOR Command

Command "CF_CCAPTIONCOLOR _%1" [CR]
"COLOR" ------- Select Color
%1
"WHITE" -------- Select White
Select color of Closed caption.
The status set with this command is stored in EEPROM and its setting is effective
even after ALL is OFF. This command is available in normal Power ON status.
Details
Note) Closed caption is available under conditions below;
Entered signal is appropriate (NTSC signal from Video or S-video) or System is
fixed to NTSC.
Acceptable
Response
Unacceptable

8.9.59 CF_FILH Command

Command "CF_FILH_%1" [CR]
%1 "RST" ---------------------- Reset Filter used time
Details Reset used time for filter of projector
Acceptable
Response
Unacceptable

8.9.60 CF_FILTIMER Command

Command "CF_FILTIMER_%1" [CR]
"04000" ---------------------- Set 4000 hours (for automatic cleaning filter)
"08000" ---------------------- Set 8000 hours (for automatic cleaning filter)
"12000" ---------------------- Set 12000 hours (for automatic cleaning filter)
"16000" ---------------------- Set 16000 hours (for automatic cleaning filter)
"00010" ---------------------- Set 10 hours (for a smoke proof filter)
"00015" ---------------------- Set 15 hours (for a smoke proof filter)
%1
"00020" ---------------------- Set 20 hours (for a smoke proof filter)
*When the parameter does not meet the type of filter, error code "101" is
returned and the command is not executed.
mounted, error code "101" is returned.
"OFF" ---------------------- Set Off (Do not warning display)
Details Set time to display Filter cleaning / replacement warning on screen
Acceptable
Response
Unacceptable

8.9.61 CF_FILCLEANTIMER Command

Command "CF_FILCLEANTIMER_%1" [CR]
"050" ---------------------- Set 50 hours
"100" ---------------------- Set 100 hours
%1 "150" ---------------------- Set 150 hours
"UP" ----------- The same operation as pressing Up key or Left key
"DN" -----------The same operation as pressing Down key or Right key
Set the time of Auto cleaning timer.
(Available only in the normal Power ON status)
Details
The status set by this command is stored in EEPROM and setting value remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
EX) When %1=00010 is received while the automatic cleaning filter is
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
59/105