Cr_Lamph Command; Cr_Lampcorresph Command; Cr_Lampinterval Command; Cr_Lamplifecontrl Command - Sanyo PLC-HF15000L - 15000 Lumens Manual

PLC-HF15000L Expand Serial Command Functional Specifications

9.9.10 CR_LAMPH Command

Command "CR_LAMPH" [CR]
Get Lamp running time (in hours)
Details
* return actual lamp running time
Acceptable
%1_%2
Response
%3_%4
Unacceptable

9.9.11 CR_LAMPCORRESPH Command

Command "CR_LAMPCORRESPH" [CR]
Get Lamp running time (in hours)
Details
*return lamp running time multiplied by a coefficient (not actual running time)
Acceptable
Response
Unacceptable

9.9.12 CR_LAMPINTERVAL Command

Command "CR_LAMPINTERVAL" [CR]
Details Get setting status of Lamp interval
Acceptable
Response
Unacceptable

9.9.13 CR_LAMPLIFECONTRL Command

Command "CR_LAMPLIFECONTRL" [CR]
Get setting status of Lamp life control.
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
"000_%1_%2_%3_%4" [CR]
Lamp 1 data comes first, and then one space, after that lamp 2
data is followed.
%1 = lamp No.1
%2 = lamp No.2
%3 = lamp No.3
%4 = lamp No.4
; In the case of 2-lamps model, % 1 and % 2 are only used
ÿ There are no % 3 and % 4ÿ
e.g.; "00410_00410_00410_00410" [CR]
▪▪▪▪ → Lamp No.1 = 410 Hours
Lamp No.2 = 410 Hours
Lamp No.3 = 410 Hours
Lamp No.4 = 410 Hours
"Error Code" [CR]
"000_%1" [CR]
%1 "00000"-"99999"
"Error Code" [CR]
"000_%1" [CR]
"0024"------------------ 24 Hours is selected
"0200"------------------ 200 Hours is selected
%1 "0500"------------------ 500 Hours is selected
"1000"------------------ 1000 Hours is selected
"2000"------------------ 2000 Hours is selected
"OFF" ------------------ Off is selected
"?" [CR]
"000_%1" [CR]
%1 "MODE1" ---------------- Mode1 is selected
"MODE2"----------------- Mode2 is selected
"Error Code" [CR]
85/105