Cf_Advcol Command - Sanyo PLC-HF15000L - 15000 Lumens Manual

PLC-HF15000L Expand Serial Command Functional Specifications

8.4.17 CF_ADVCOL Command

Command "CF_ADVCOL_%1" [CR]
"AUTO" -------------- Set Advanced color to Auto
"OFF" ----------------- Set Advanced color OFF.
%1 "UP" ----------- The same operation as pressing Up key or Left key
"DN" -----------The same operation as pressing Down key or Right key
*"UP" and "DN" are exactly same operation.
Set Advanced color mode (Available only in the normal Power ON status)
The value set by this command is not stored in the projector's memory. Therefore,
Details
when the power is turned to ALL OFF status, the value returns to the original
setting. (It is stored in Suspend mode.)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
27/105