Cf_Ceil Command; Cf_Rear Command; Cf_Vscale Command - Sanyo PLC-HF15000L - 15000 Lumens Manual

PLC-HF15000L Expand Serial Command Functional Specifications

8.7.10 CF_CEIL Command

Command "CF_CEIL_%1" [CR]
"ON" --------------------------- Set Ceiling to ON
%1
"OFF" ------------------------- Set Ceiling to OFF
Set/Cancel Ceiling. (Valid only when in the normal Power ON status.)
When Ceiling is set to ON, image is left/right as well as top/bottom reversed.
Details
The status set by this command is stored in EEPROM and the setting remains
effective after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable

8.7.11 CF_REAR Command

Command "CF_REAR_%1" [CR]
"ON" --------------------------- Set Rear to ON
%1
"OFF" ------------------------- Set Rear to OFF
Set/Cancel Rear. (Valid only when in the normal Power ON status.)
When Rear is set to ON, image is left/right reversed.
Details
The status set by this command is stored in EEPROM and the setting remains
effective after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable

8.7.12 CF_VSCALE Command

Command "CF_VSCALE_%1" [CR]
"035" ---------------------- +35
"031" ---------------------- +31
"001" ---------------------- +1
"000" ---------------------- ±0
" 01" --------------------- 1
%1
" 31" --------------------- 31
" 32" --------------------- 32
"UP" --------------------- Increment setting value of Vscale by 1
"DN" --------------------- Decrement setting value of Vscale by 1
Set Vscale (Available only in the normal Power ON status)
*When selected screen mode is a setting except Custom, return "101" [CR] and
Details
the command is not executed.
* When input is no signal, return "101" [CR] and the command is not executed.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
ÿ
ÿ
"000" [CR]
"Error Code" [CR]
38/105