Input Read Command; Cr_Input Command; Cr_Source Command - Sanyo PLC-HF15000L - 15000 Lumens Manual

PLC-HF15000L Expand Serial Command Functional Specifications

9.7 Input Read Command

9.7.1 CR_INPUT Command

Command "CR_INPUT" [CR]
Details Get selected INPUT No.
Acceptable
Response
Unacceptable

9.7.2 CR_SOURCE Command

Command "CR_SOURCE" [CR]
Details Get selected Source
Acceptable
Response
Unacceptable
"000_%1" [CR]
%1 "1" – "4"
"?" [CR]
"000_%1" [CR]
"DIGITAL" --------------------- DVI Input is selected
"ANALOG --------------------- ANALOG RGB is selected
"VIDEO" ----------------------- Video Input is selected
"S-VIDEO" -------------------- S-VIDEO Input is selected
"YPBPR" ---------------------- Y, Pb/Cb, Pr/Cr Input is selected
"SDI1" -------------------------- DF-SDI1 Input is selected
"SDI2"---- ---------------------- DF-SDI2 Input is selected
"HDCP" ----------------------- HDCP Input is selected
"SCART" ---------------------- SCART Input is selected
"HDMI" -------------------- HDMI Input is selected
%1
"LINKA-YCBCR" -------- LINK-A(YCBCR1) Input is selected
"LINKB-YCBCR" -------- LINK-B(YCBCR1)Input is selected
"DUAL-YCBCR1" --------- DUAL(YCBCR1)Input is selected
"DUAL-YCBCR2" -------- DUAL(YCBCR2)Input is selected
"DUAL-YCBCR3" -------- DUAL(YCBCR3)Input is selected
"DUAL-YCBCR4" -------- DUAL(YCBCR4)Input is selected
"DUAL-RGB1" -------- DUAL(RGB1)Input is selected
"DUAL-RGB2" -------- DUAL(RGB2)Input is selected
"BLANK" ---------------------- without Source
"NOCARD" --------------------- There is no board inserted
"Error Code" [CR] -------------- When command is invalid in the
given condition (such as being selected input)
"?" [CR] --------- When unknown command is received
73/105