PLC-HF15000L Expand Serial Command Functional Specifications
8.4.9 CF_WBAL- Command
Command
"CF_WBAL-%1_%2" [CR]
"R" ------------- RED
%1
"G" ------------ GREEN
"B" ------------- BLUE
"000-063"------ Directly specify value of Color selected in %1 of White Balance.
%2
"UP"------ Increment setting value of Color specified in %1 of White Balance by 1
"DN"----- Decrement setting value of Color specified in %1 of White Balance by 1
Set value of Color specified in %1 of White Balance (Available only in the normal
Power ON status)
Details
The value set by this command is not stored in the projector's memory. Therefore,
when the power is turned to ALL OFF status, the value returns to the original
setting. (It is stored in Suspend mode.)
Acceptable
Response
Unacceptable
8.4.10 CF_OFFSET- Command
Command
"CF_OFFSET-%1_%2" [CR]
"R" --------- RED
%1
"G" --------- GREEN
"B" --------- BLUE
"000-063"------ Directly specify value of Color selected in %1 of Offset.
%2
"UP"------------ Increment setting value of Color specified in %1 of Offset by 1
"DN"------------ Decrement setting value of Color specified in %1 of Offset by 1
Set value of Color specified in %1 of Offset (Available only in the normal Power ON
status)
Details
The value set by this command will not be stored in the projector's memory.
Therefore, when the power is turned to ALL OFF status, the value returns to the
original setting. (It is stored in Suspend mode.)
Acceptable
Response
Unacceptable
8.4.11 CF_SHARP Command
Command
"CF_SHARP_%1" [CR]
"000-031" -------------- Directly specify setting value of Sharpness.
%1
"UP"--------------------- Increment setting value of Sharpness by 1
"DN"--------------------- Decrement setting value of Sharpness by 1
Set user controlled value of Sharpness. (Available only in the normal Power ON
status)
Details
The value set by this command is not stored in the projector's memory. Therefore,
when the power is turned to ALL OFF status, the value returns to the original
setting. (It is stored in Suspend mode.)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code"[CR]
"000" [CR]
"Error Code" [CR]
24/105