Cf_Pipsize Command; Cf_Pipsizemain Command; Cf_Pipsizesub Command - Sanyo PLC-HF15000L - 15000 Lumens Manual

PLC-HF15000L Expand Serial Command Functional Specifications
Select input and source of Sub picture of "Picture in Picture". (Valid only when in
the normal Power ON status.)
* In the case of a specific status, return Error Code "101" [CR] and the command is
Details not executed.
- When selected Source does not meet the requirement for Input.
- When selected Input3 / Input4 without Board in Input3 or Input4
- When selected Input / Source is invalid in "Picture in Picture" mode.
Acceptable
Response
Unacceptable

8.9.10 CF_PIPSIZE Command

Command "CF_PIPSIZE_%1_%2" [CR]
"1" -------------------- Set main picture size to 10%
"2" -------------------- Set main picture size to 20%
"3" -------------------- Set main picture size to 30%
"4" -------------------- Set main picture size to 40%
"5" -------------------- Set main picture size to 50%
%1
"6" -------------------- Set main picture size to 60%
"7" -------------------- Set main picture size to 70%
"8" -------------------- Set main picture size to 80%
"9" -------------------- Set main picture size to 90%
"10" ------------------ Set main picture size to 100%
"1" -------------------- Set sub picture size to 10%
"2" -------------------- Set sub picture size to 20%
%2 "3" -------------------- Set sub picture size to 30%
"4" -------------------- Set sub picture size to 40%
"5" -------------------- Set sub picture size to 50%
Set display size of "Picture in Picture".
Details (Valid only when in the normal Power ON status.)
*When "Picture in Picture" is set to Off, return "101" [CR]
Acceptable
Response
Unacceptable

8.9.11 CF_PIPSIZEMAIN Command

Command "CF_PIPSIZEMAIN _%1" [CR]
"UP" --------------------- Increment setting value of Main picture size.
%1
"DN" --------------------- Decrement setting value of Main picture size.
Set the size of Main picture for "Picture in Picture".
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable

8.9.12 CF_PIPSIZESUB Command

Command "CF_PIPSIZESUB _%1" [CR]
"UP" --------------------- Increment setting value of Sub picture size.
%1
"DN" --------------------- Decrement setting value of Sub picture size.
Set the size of Sub picture for "Picture in Picture".
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
46/105