Screen Status Read Commands; Cr_Screen Command; Cr_Kystnmode Command; Cr_Cornertestpat Command - Sanyo PLC-HF15000L - 15000 Lumens Manual

PLC-HF15000L Expand Serial Command Functional Specifications

9.8 Screen Status Read Commands

9.8.1 CR_SCREEN Command

Command "CR_SCREEN" [CR]
Details Get currently selected screen image size
Acceptable
Response
Unacceptable

9.8.2 CR_KYSTNMODE Command

Command "CR_KYSTNMODE" [CR]
Details Get setting status of Keystone Store Mode
Acceptable
Response
Unacceptable

9.8.3 CR_CORNERTESTPAT Command

Command "CR_CORNERTESTPAT" [CR]
Details Get setting status of test pattern for Corner correction
Acceptable
Response
Unacceptable

9.8.4 CR_CEIL Command

Command "CR_CEIL" [CR]
Details Get setting status of Ceiling
Acceptable
Response
Unacceptable
"000_%1" [CR]
"NORMAL" ---------------------- Normal mode
"WIDE" --------------------------- Wide(16:9) mode
"ZOOM" -------------------------- Zoom mode
%1 "NATURAL" -------------------- Natural wide mode
"FULL" --------------------------- Full mode
"TRUE" --------------------------- True mode
"CUSTOM" ----------------------- Custom mode
"Error Code" [CR] -------------- When command is invalid in the
given condition (such as being selected input)
"?" [CR] ----------------------- When unknown command is received
"000_%1" [CR]
"STR" ---------------------- Store mode is "Store"
%1
"RST" ---------------------- Store mode is "Reset"
"?" [CR] -------------------- When unknown command is received
"000_%1" [CR]
"RED" ---------------------------- Test pattern is red
"WHITE" ------------------------- Test pattern is white
%1
"BLUE" --------------------------- Test pattern is blue
"OFF" ------------------------- Test pattern is not displayed
"?" [CR] -------------------- When unknown command is received
"000_%1" [CR]
"ON" --------------------------- Ceiling projection is enabled
%1
"OFF" ------------------------- Ceiling projection is disabled
"Error Code" [CR]
80/105