Panel Button - Epson L60IIP - TM B/W Direct Thermal Printer Information Manual

Chapter 3
Command Reference
Command Classification
ESC/POS printer commands in this chapter are classified by function and by sheet and grade. The
sheet and grade classification is called matrix classification.
The sheet classification is divided into single sheet commands and multiple sheet commands. The grade
classification is separated into basic commands and extension commands.
Basic commands are defined as fundamental printer controls, including print commands and character
type selection commands. Extension commands are defined as control codes for functions specific to
individual printers. These commands are further divided into mechanical extension commands that
relate to additional mechanical functions such as stamp and auto-cutter units, hardware extension
commands that relate to additional hardware functions such as panel button control, and software
extension commands that relate to additional software functions such as user-defined and Bar code
control.
The commands can also be classified by function, which is how they are presented in Chapter 1 and
the Function Type table in this chapter. The function types, such as Print Commands and Line
Spacing Commands, are briefly explained in the corresponding sections of Chapter 1.
The illustration below shows the ESC/POS command overview diagram for printers.
Sheet
Rev. A
Multiple sheet
Multiple sheet
commands
Single sheet
Single sheet commands
Basic commands
TM–L60II/L60IIP Information Manual
Extension commands
Grade
Command Reference 3-1