The TM-L60II can also be used as the following:
A one-station printer for ECR and POS.
A ticket-issuing device.
An output device for weighing and other types of measurement.
A small scale label-marker for stores.
Option
EPSON power supply unit, PS-150.
Specifications
Printing specifications
Printing method:
Printing speed:
Dot density:
Printing width:
Character specifications
Character fonts:
Characters per line: Thermal paper : 32/42
Character size:
Character sets:
Paper size:
Interface:
Receive buffer:
Rev. A
Thermal line printing
Approximately 12 lines/second (1/6-inch feed)
180 dpi
180 dpi
Thermal paper: 54.19 mm (2.13"), 384 dot positions
Thermal label : 51.93 mm (2.04"), 368 dot positions
12 24/9 24
Thermal label : 30/40
1.41(W)
3.39(H) mm/.99(W) 3.39(H) mm
ASCII: 95 characters
International: 32 characters
Extended graphics: 128 characters 6 pages
Thermal paper : 59.0-60.5(W) mm
Thermal label : 59.5-61.0(W) mm 83.0 mm diameter
RS-232 (serial interface)
or
IEEE 1284 (parallel interface)
4K or 45 bytes (selectable by DIP switch)
83.0 mm diameter
iii