Status - Epson L60IIP - TM B/W Direct Thermal Printer Information Manual

ESC u n
[Name] Transmit peripheral device status
[Format] ASCII
Hex
Decimal
[Range] n = 0, 48
ESC u n transmits the status of drawer kick-out connector pin 3 as 1 byte of data when n=0 or 48. This
command allows the host to determine the status of a peripheral device. GS r is preferred for
checking the status because ESC u is not a recommended command.
PRINT #1, CHR$(&H1B);"p";CHR$(0);CHR$(25);CHR$(250);
PRINT #1, CHR$(&H1B);"u";CHR$(0);
Peripheral device status
Bit Off/On Hex Decimal
Off 00 0
0
On 01 1
1–3 — — —
4 Off 00 0
5, 6 — — —
7 Off 00 0
Rev. A
ESC u n
n
1B 75
27 117 n
Program Example

Status

Drawer kick-out connector pin 3 is LOW.
Drawer kick-out connector pin 3 is HIGH.
Undefined.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
TM–L60II/L60IIP Information Manual
Generates a pulse
Command Descriptions 1-47