Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 88

Command Name Function
ESC ! Select print Selects a print
mode(s) mode(s).
ESC $ Set absolute Sets the print starting
print position position from the
beginning of the line.
ESC % Select/ Selects or cancels
cancel user- the user-defined
defined character set.
character set
ESC & Define user- Defines user-defined
defined characters for a
characters specified character
code.
ESC Select bit- Selects a bit-image
image mode mode for a specified
number of dots.
ESC – Turn underline Turns underline mode
mode on/off on or off.
ESC 2 Select default Sets the line spacing
line spacing to 1/6 inch.
ESC 3 Set line Sets the line spacing
spacing to a specified value.
ESC < Return home Moves the print head
to the home position.
ESC = Select Selects the device
peripheral to which the host
device computer sends
data.
ESC ? Cancel user- Cancels the user-
defined defined characters
characters for a specified
character code.
The commands supported by each printer are marked by a
TM-T Series TM-L Series TM-U200 TM-300/300M TM-
TM-
267II
T60 T80 T80M T85 L60
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
270
L60II B D A B C D
O O O O
TM-U375 TM- TM-U950 TM-
TM-U375M U925 TM-U950M 215S
TM-
295