Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 40

ESC W x x y y dx
L H L H
[Name] Set printing area in page mode
[Format] ASCII
Hex
Decimal
[Range] 0 x , x
L H
(except for dx
ESC W x x y y dx
L H L H L
follows:
Horizontal starting position = [(x
Vertical starting position = [(y
Printing area width = [(dx
Printing area height = [(dy
The default settings are as follows:
x = x = y = y = 0
L H L H
dx = 0, dx = 2, dy
L H
This command is enabled only in page mode. If this command is entered in standard mode, an
internal flag is activated and the command is enabled when the printer selects page mode.
The horizontal and vertical motion units use the horizontal and vertical values set by the GS P
command. The default settings of the horizontal and vertical motion units are 1/180 and 1/360
inches, respectively.
PRINT #1, CHR$(&H1B);"L";
PRINT #1, CHR$(&H1B);"W";CHR$(0);CHR$(0);CHR$(0);CHR$(0);CHR$(180);
CHR$(0);CHR$(132);CHR$(3);
PRINT #1, CHR$(&H1B);"T";CHR$(0);
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HA);
PRINT #1, CHR$(&H1B);"T";CHR$(2);
PRINT #1, "CCCCC"; CHR$(&HA);
PRINT #1, "DDDDD"; CHR$(&HC);
Rev. A
dx dy dy
L H L H
ESC W
1B 57
27 87
, y , y , dx , dx , dy , dy
L H L H L
= dx = 0 or dy = dy
L H L
dx dy dy sets the size and position of the printing area in page mode as
H L H
+ x 256) (horizontal motion unit)] inches
L H
+ y 256) (vertical motion unit)] inches
L H
+ dx 256) (horizontal motion unit)] inches
L H
+ dy 256) (vertical motion unit)] inches
L H
= 126, dy = 6
L H
Program Example
Select page mode
Select print direction
Store characters for printing
Store characters for printing
Select print direction
Store characters for printing
Batch print and return to standard mode
TM–L60II/L60IIP Information Manual
x x y y dx dx
L H L H L H
x x y y dx dx
L H L H L H
x x y y dx dx
L H L H L H
255
H
= 0)
H
dy dy
L H
dy dy
L H
dy dy
L H
Print Sample
AAAAA
BBBBB
Printing
area set
by ESC W
DDDDD
CCCCC
Command Descriptions 1-33