Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 68

ESC L
[Name] Select page mode
[Format] ASCII
Hex
Decimal
ESC S
[Name] Select standard mode
[Format] ASCII
Hex
Decimal
ESC L switches from standard mode to page mode. This command is enabled only when input at the
beginning of a line in standard mode; it has no effect in page mode. The following commands are not
effective in page mode: ESC V, ESC a, ESC {, GS L, and GS W. If these commands are processed in
page mode, an internal flag is activated.
ESC S switches from page mode to standard mode. This command is effective only in page mode.
Data buffered in page mode is cleared. This command returns the values set by ESC W to the default
values. The value set by the ESC T is maintained. The printer returns to standard mode with the FF,
ESC @, and ESC S. This command sets the print position to the beginning of the line.
Standard mode is selected as the default.
Program Example
PRINT #1, CHR$(&H1B);"L";
PRINT #1, CHR$(&H1B);"W";CHR$(0);CHR$(0);CHR$(0);
CHR$(0);CHR$(60);CHR$(0);CHR$(180);CHR$(0);
PRINT #1, CHR$(&H1B);"T";CHR$(0);
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HA);
PRINT #1, "CCCCC";
PRINT #1, CHR$(&H1B);CHR$(&HC);
PRINT #1, CHR$(&H1B);"S";
Rev. A
ESC L
1B 4C
27 76
ESC S
1B 53
27 83
Select page mode
Select print direction
Store characters for printing
Store characters for printing
Batch print
Select standard mode
TM–L60II/L60IIP Information Manual
Print Sample
AAAAA
BBBBB
CCCCC
Command Descriptions 1-61