Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 46

GS x y d1...d(x y 8)
[Name] Define downloaded bit image
[Format] ASCII
Hex
Decimal
[Range] 1 x 255
1 y 48
x y 1536
0 d 255
GS / m
[Name] Print downloaded bit image
[Format] ASCII
Hex
Decimal
[Range] 0 m 3
48 m
GS x y d1...d(x y 8) defines a downloaded bit image using x 8 dots in the horizontal direction
and y 8 dots in the vertical direction. Once a downloaded bit image has been defined, it is available
until another definition is made, ESC @ or ESC & is executed, the printer is reset, or the power is
turned off. When this command is executed, the user-defined characters are cleared. The default
setting is no downloaded bit image defined.
GS / m prints a downloaded bit image using the mode specified by m, as follows. In standard mode,
this command is effective only when there is no data in the print buffer. This command is ignored if a
downloaded bit image has not been defined.
m Mode
0, 48 Normal
1, 49 Double-width
2, 50 Double-height
3, 51 Quadruple
Rev. A
GS
1D 2A
29 42
GS /
1D 2F
29 47
51
Vertical Dot Density
180 DPI
180 DPI
90 DPI
90 DPI
TM–L60II/L60IIP Information Manual
x y d1...d(x y 8)
x y d1...d(x y 8)
x y d1...d(x y 8)
m
m
m
Horizontal Dot Density
180 DPI
90 DPI
180 DPI
90 DPI
Command Descriptions 1-39