Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 50

Third byte (paper sensor information)
Bit Off/On Hex Decimal Status for ASB
Off 00 0
0,1
On 03 3
Off 00 0
2,3
On 0C 12
4 Off 00 0
5,6 — — —
7 Off 00 0
Fourth byte (paper sensor information)
Bit Off/On Hex Decimal Status for ASB
0-3 — — —
4 Off 00 0
5,6 — — —
7 Off 00 0
GS r n
[Name] Transmit status
[Format] ASCII
Hex
Decimal
[Range] n = 1, 2, 49, 50
GS r n transmits 1 byte status data specified by n as follows: paper sensor status when n=1 or 49 and
drawer kick-out connector status when n=2 or 50. When the paper roll end sensor detects a paper-end, the
printer goes off-line and does not execute this command. Therefore, bit 2 and 3 do not transmit paper-end
status.
PRINT #1, CHR$(&H1D);"r";CHR$(1)
Rev. A
Paper roll near-end sensor: paper adequate.
Paper roll near-end sensor: paper near end.
Paper roll end sensor: paper present.
Paper roll end sensor: paper not present.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
GS r
1D 72
29 114
Program Example
;
Transmits paper sensor status
TM–L60II/L60IIP Information Manual
n
n
n
Command Descriptions 1-43