Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 89

Command Name Function
ESC @ Initialize Clears the data in the
printer print buffer and resets
the printer mode to
the mode that was in
effect when the
power was turned on.
ESC C Set cut sheet Sets the eject length
eject length for cut sheet to a
specified number of
lines.
ESC D Set horizontal Sets the horizontal
tab positions tab positions.
ESC E Turn Turns emphasized
emphasized mode on or off.
mode on/off
ESC F Set/cancel Sets or cancels the
cut sheet cut sheet reverse
reverse eject eject specified by FF.
ESC G Turn double- Turns double-strike
strike mode mode on or off.
on/off
ESC J Print and Prints the data in the
feed paper print buffer and
feeds the paper a
specified distance.
ESC K Print and Prints the data in the
reverse feed print buffer and
feeds the paper a
specified distance in
the reverse direction.
ESC L Select page Switches from
mode standard mode to
page mode.
The commands supported by each printer are marked by a
TM-T Series TM-L Series TM-U200
TM-
267II
T60 T80 T80M T85 L60
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
TM-300/300M TM-
270
L60II B D A B C D
O O O O
O O O O
TM-U375 TM- TM-U950 TM-
TM-U375M U925 TM-U950M 215S
TM-
295