Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 16

FF
[Name] Print and feed label to print starting position (on label)
[Format] ASCII
Hex
Decimal
GS FF
[Name] Print and eject label
[Format] ASCII
Hex
Decimal
FF prints the data and feeds the next label to the print starting position when thermal label is selected
in standard mode.
GS FF prints the data in the print buffer and ejects the label. This command is effective only when
thermal label is selected with the paper selection DIP switch. When the printer label is advanced so
that the label can be peeled off, the PAPER LED blinks as it waits for the PAPER FEED switch to be
pressed. When the PAPER FEED switch is pressed, the next label is fed to the print start position. After
advancing the label, the line moves to the print start position.
This command is only effective when thermal label is selected with the paper selection DIP switch,
and is enabled only in standard mode.
Program Example
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&H1D);CHR$(&HC);
PRINT #1, "CCCCC"; CHR$(&HA);
Rev. A
FF
0C
12
GS FF
1D 0C
29 12
TM–L60II/L60IIP Information Manual
Print Sample
AAAAA
BBBBB
CCCCC
Command Descriptions 1-9