Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 26

ESC G n
[Name] Turn double-strike mode on/off
[Format] ASCII
Hex
Decimal
[Range] 0 n 255
ESC G n turns double-strike mode on or off. When the LSB (least significant bit) of n is 1, double-
strike mode is turned on; when it is 0, double-strike mode is turned off. The default setting is n=0.
Double-strike and emphasized printing appear the same.
Program Example
PRINT #1, CHR$(&H1B);"G";CHR$(1);
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, CHR$(&H1B);"G";CHR$(0);
PRINT #1, "BBBBB"; CHR$(&HA);
Rev. A
ESC G n
n
1B 47
27 71 n
(Only the least significant bit of n is enabled.)
Select
Cancel
TM–L60II/L60IIP Information Manual
Print Sample
AAAAA
Double-strike
BBBBB
Normal
Command Descriptions 1-19